 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| www..com SHANGHAI TIANMA MICRO-ELECTRONICS TM014FDH01 V1.0 Table of Contents Coversheet........................................................................................................................................ 1 Table of Contents .............................................................................................................................. 2 Record of Revision............................................................................................................................ 3 1 General Specifications ............................................................................................................... 4 2 Input/Output Terminals ............................................................................................................... 5 3 Absolute Maximum Ratings ....................................................................................................... 6 4 Electrical Characteristics............................................................................................................ 7 5 Timing Chart............................................................................................................................... 9 6 Power On/Off Sequence .......................................................................................................... 14 7 Optical Characteristics ............................................................................................................. 16 8 Environmental / Reliability Tests............................................................................................... 20 9 Mechanical Drawing................................................................................................................. 21 10 Packing Drawing ...................................................................................................................... 22 11 Precautions for Use of LCD Modules ....................................................................................... 23 www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 2 of 23 SHANGHAI TIANMA MICRO-ELECTRONICS TM014FDH01 V1.0 Record of Revision Rev 1.0 Issued Date 2009-06-16 Preliminary Release Description Editor Enhao Li www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 3 of 23 SHANGHAI TIANMA MICRO-ELECTRONICS TM014FDH01 V1.0 1 General Specifications Feature Size Resolution Interface Color Depth Technology Type Display Spec Pixel Pitch (mm) Pixel Configuration Display Mode Surface Treatment(Up Polarizer) Viewing Direction Gray Scale Inversion Direction LCM (W x H x D) (mm) Mechanical Characteristics Active Area(mm) With /Without TSP Weight (g) LED Numbers Electronic Driver IC 1.45 inch 128(RGB) x 128 CPU 8 bits 65/262k a-Si 0.203x 0.203 R.G.B Vertical Stripe TM with Normally White Clear Type (3H) 6 o'clock 12 o'clock 33.35x41.64x2.40 26.035x26.035 Without TSP 4.52 1 LED HX8353-C Spec Note 1:Viewing direction for best image quality is different from TFT definition, there is a 180 degree shift. Note 2 : Requirements on Environmental Protection: RoHS Note 3: LCM weight tolerance: 5% www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 4 of 23 SHANGHAI TIANMA MICRO-ELECTRONICS TM014FDH01 V1.0 2 Input/Output Terminals 2.1 No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 TFT LCD Panel Symbol LED_A LED_K VSS NC NC /CS /RETB RS WRB RDB D0 D1 D2 D3 D4 D5 D6 D7 VSS VDD I/O definition I-----Input www..com I/O P P P I I I I I I I I I I I I I P P Back light anode Back light cathode Ground Not Connected Not Connected Description Remark Chip select signal , low: chip can be accessed Reset Signal Command/Data select signal, low: instruction; high: data Write signal Read signal Data input Data input Data input Data input Data input Data input Data input Data input Ground Power supply Note2-1: O---Output P----Power/ Ground NC--- Not Connected The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 5 of 23 SHANGHAI TIANMA MICRO-ELECTRONICS TM014FDH01 V1.0 3 Absolute Maximum Ratings 3.1 Driving TFT LCD Panel Ta = 25oC Item Logic Supply Voltage Analog Supply Voltage Input Signal Voltage Back Light Forward Current Operating Temperature Storage Temperature Symbol VDD VDD D0~D7,/CS,RS,WRB, RDB,/RETB Min 2.3 2.3 -0.3 --20 -30 Max Unit 3.3 3.3 VDD +0.3 25 70 80 V V V mA Remark ILED TOPR TSTG www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 6 of 23 SHANGHAI TIANMA MICRO-ELECTRONICS TM014FDH01 V1.0 4 Electrical Characteristics 4.1 Driving TFT LCD Panel GND=0V, Ta=25 Item Logic Supply Voltage Analog Supply Voltage Input Signal Voltage Low Level High Level Low Level High Level Symbol VDD VDD VIL VIH VOL VOH Black Mode (60Hz) Sleeping Mode Min 2.3 2.3 0 0.8xVDD -0.8xVDD --Typ 2.8 2.8 ----TBD TBD Max 3.3 3.3 0.2xVDD VDD 0.2xVDD VDD --Unit V V V V V V mW uW D0~D7,/CS,RS,WRB, RDB,/RETB Remark Output Signal Voltage (Panel+ LSI) Power Consumption Note: We will provide the power consumption after we test the samples. 4.2 Driving Backlight Item Forward Current Forward Voltage Power Consumption Ta=25 Symbol IF VF WBL Min ---Typ 20 3.2 64 Max 25 --Unit mA V mW 1 LED Remark Note1: Figure below shows the connection of backlight LED. Note 2: One LED: IF =20 mA, VF =3.2V Note 3: The life of LED: 20,000 hours www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 7 of 23 SHANGHAI TIANMA MICRO-ELECTRONICS 4.3 Block Diagram TM014FDH01 V1.0 www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 8 of 23 SHANGHAI TIANMA MICRO-ELECTRONICS TM014FDH01 V1.0 5 Timing Chart 5.1 Interface Characteristics Figure 5.1 CPU Interface Characteristics 5.2 Timing Parameter Normal Write Mode www..com Table 5.1 CPU Interface Timing Parameter The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 9 of 23 SHANGHAI TIANMA MICRO-ELECTRONICS 5.3 Register Write/Read Timing 5.3.1 System Bus Interface Register Write Timing TM014FDH01 V1.0 Figure 5.3.1 System Bus Interface Write Register Timing 5.3.2 System Bus Interface Register Read Timing Figure 5.3.2 System Bus Interface Read Register Timing www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 10 of 23 SHANGHAI TIANMA MICRO-ELECTRONICS 5.4 GRAM Write/Read Data Format TM014FDH01 V1.0 Figure 5.4 8-bit Data Bus GRAM Write/Read Data Format (65K) www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 11 of 23 SHANGHAI TIANMA MICRO-ELECTRONICS 5.5 GRAM Write/Read Timing TM014FDH01 V1.0 www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 12 of 23 SHANGHAI TIANMA MICRO-ELECTRONICS 5.6 Reset Timing Characteristics TM014FDH01 V1.0 /RETB Figure Reset Timing www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 13 of 23 SHANGHAI TIANMA MICRO-ELECTRONICS TM014FDH01 V1.0 6 Power On/Off Sequence 6.1 Power on Sequence Power Supply ON (VDD,) Power On Reset and Display OFF Registers setting for power supply startup 80ms or more Step-up circuit stabilizing time Operational Amplifier stabilizing time Set the other registers Display ON Sequence Display ON www..com BLU ON The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 14 of 23 SHANGHAI TIANMA MICRO-ELECTRONICS 6.2 Power Off Sequence TM014FDH01 V1.0 www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 15 of 23 SHANGHAI TIANMA MICRO-ELECTRONICS TM014FDH01 V1.0 7 Optical Characteristics Ta=25 Item Symbol Condition T View Angles B L R Contrast Ratio Response Time White Red Chromaticity Green Blue Uniformity NTSC Luminance L CR Ton Toff x y x y x y x y U Backlight is on =0 25 CR10 Min 40 15 40 40 300 0.245 0.257 0.529 0.295 0.283 0.511 0.110 0.056 160 Typ 45 20 45 45 350 25 0.295 0.307 0.589 0.345 0.333 0.561 0.160 0.086 80 50 180 Max 40 0.345 0.357 0.679 0.395 0.383 0.611 0.210 0.156 % % cd/m2 Note1 Note6 Note 5 Note1 Note7 Note5, Note1 ms Note1 Note3 Note1 Note4 Degree Note 2 Unit Remark Test Conditions: 1. 2. VF=3.2V, IF=20mA, the ambient temperature is 25. The test systems refer to Note 1 and Note 2. www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 16 of 23 SHANGHAI TIANMA MICRO-ELECTRONICS TM014FDH01 V1.0 Note 1: Definition of optical measurement system. The optical characteristics should be measured in dark room. After 5 minutes operation, the optical properties are measured at the center point of the LCD screen. All input terminals LCD panel must be ground when measuring the center area of the panel. Photo detector Field 500mm TFT-LCD Module LCD Panel Item Contrast Ratio The center of the screen Photo Detector Field Luminance Chromaticity Lum Uniformity Response Time SR-3A 1 BM-7A 2 Note 2: Definition of viewing angle range and measurement system. viewing angle is measured at the center point of the LCD by CONOSCOPE(ergo-80) www..com Fig. 1 Definition of viewing angle The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 17 of 23 SHANGHAI TIANMA MICRO-ELECTRONICS TM014FDH01 V1.0 Note 3: Definition of contrast ratio "White state ":The state is that the LCD should driven by Vwhite. "Black state": The state is that the LCD should driven by Vblack. Vwhite: To be determined Vblack: To be determined. Note 4: Definition of Response time The response time is defined as the LCD optical switching time interval between "White" state and "Black" state. Rise time (TON) is the time between photo detector output intensity changed from 90% to 10%. And fall time (TOFF) is the time between photo detector output intensity changed from 10% to 90%. Note 5: Definition of color chromaticity (CIE1931) Color coordinates measured at center point of LCD. www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 18 of 23 SHANGHAI TIANMA MICRO-ELECTRONICS TM014FDH01 V1.0 Note 6: Definition of Luminance Uniformity Active area is divided into 9 measuring areas (Refer Fig. 2). Every measuring point is placed at the center of each measuring area. Luminance Uniformity(U) = Lmin/ Lmax L-------Active area length W----- Active area width Fig. 2 Definition of uniformity Lmax: The measured maximum luminance of all measurement position. Lmin: The measured minimum luminance of all measurement position. Note 7: Definition of Luminance: Measure the luminance of white state at center point. www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 19 of 23 SHANGHAI TIANMA MICRO-ELECTRONICS TM014FDH01 V1.0 8 Environmental / Reliability Tests No 1 2 3 4 5 Test Item Condition Remarks Note1 IEC60068-2-2,GB2423.2--89 IEC60068-2-1 GB2423.1--89 IEC60068-2-2, GB2423.2--89 IEC60068-2-1 GB2423.1--89 Note2 IEC60068-2-3, GB/T2423.3--2006 Start with cold temperature, End with high temperature, IEC60068-2-14,GB2423.22--87 IEC61000-4-2 GB/T17626.2--1998 High Temperature Ts=+70, 240hrs Operation Low Temperature Ta=-20, 240hrs Operation High Temperature Storage Low Temperature Storage High Temperature & High Humidity Storage Ta=+80, 240hrs Ta=-30, 240hrs Ta=+60, 90% RH 240 hours 6 Thermal Shock -30 30 min~+70 30 min, (Non-operation) Change time:5min, 50 Cycles Electro Static Discharge (Operation) C=150pF, R=3305points/panel Air:8KV, 5times; Contact:4KV, 5 times; Environment: 1535, 30%60%, 86Kpa106Kpa 7 8 9 10 Frequency range:10~55Hz, Stroke:1.5mm IEC60068-2-6 Vibration Sweep:10Hz~55Hz~10Hz 2 hours GB/T2423.10--1995 (Non-operation) for each direction of X.Y.Z. (6 hours for total) (Package condition) Shock 100G 6ms, X,Y,Z 3times, IEC60068-2-27 (Non-operation) for each direction GB/T2423.5--1995 Package Height:80 cm, IEC60068-2-32 Drop Test 1 corner, 3 edges, 6 surfaces GB/T2423.8--1995 Note1: Ts is the temperature of panel's surface. Note2: Ta is the ambient temperature of sample. www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 20 of 23 SHANGHAI TIANMA MICRO-ELECTRONICS TM014FDH01 V1.0 9 Mechanical Drawing www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 21 of 23 SHANGHAI TIANMA MICRO-ELECTRONICS TM014FDH01 V1.0 10 Packing Drawing No 1 2 3 4 5 6 7 8 Item LCM module Tray EPE Anti-static bag BOX Desiccant Carton Total weight Model (Material) TM014FDH01 PETTransmit EPE PE CORRUGATED PAPER Desiccant CORRUGATED PAPER TBD Dimensions(mm) 33.35x41.64x2.4 315x247x10.3 315x247x5 327x440 345x260x70 45x50 544x365x250 Unit Weight(Kg) 4.52 TBD 0.009 0.021 0.227 0.0035 1.01 Quantity 1008 48 12 6 6 12 1 ??:???????????? ??: ? ? ? :? ?? ? ? ? ?? ? ? ? ? ? ?: ? LCM ??:???????????? ??: ? ? ? :? ?? ? ? ? ?? ? ? ? ? ? ?: ? ??:???????????? ??: ? ? ? :? ?? ? ? ? ?? ? ? ? ? ? ?: ? ??:???????????? ??: ? ? ? :? ?? ? ? ? ?? ? ? ? ? ? ?: ? 7trays, 24 LCMS per tray dust-proof bag 888 201201 6 Box M www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 22 of 23 SHANGHAI TIANMA MICRO-ELECTRONICS TM014FDH01 V1.0 11 Precautions for Use of LCD Modules 11.1 Handling Precautions 11.1.1 The display panel is made of glass. Do not subject it to a mechanical shock by dropping it from a high place, etc. 11.1.2 If the display panel is damaged and the liquid crystal substance inside it leaks out, be sure not to get any in your mouth, if the substance comes into contact with your skin or clothes, promptly wash it off using soap and water. 11.1.3 Do not apply excessive force to the display surface or the adjoining areas since this may cause the color tone to vary. 11.1.4 The polarizer covering the display surface of the LCD module is soft and easily scratched. Handle this polarizer carefully. 11.1.5 If the display surface is contaminated, breathe on the surface and gently wipe it with a soft dry cloth. If still not completely clear, moisten cloth with one of the following solvents: Isopropyl alcohol Ethyl alcohol Solvents other than those mentioned above may damage the polarizer. Especially, do not use the following: Water Ketone Aromatic solvents 11.1.6 11.1.7 Do not attempt to disassemble the LCD Module. If the logic circuit power is off, do not apply the input signals. 11.1.8 To prevent destruction of the elements by static electricity, be careful to maintain an optimum work environment. 11.1.8.1 Be sure to ground the body when handling the LCD Modules. 11.1.8.2 Tools required for assembly, such as soldering irons, must be properly ground. 11.1.8.3 To reduce the amount of static electricity generated, do not conduct assembly and other work under dry conditions. 11.1.8.4 The LCD Module is coated with a film to protect the display surface. Be care when peeling off this protective film since static electricity may be generated. 11.2 Storage precautions 11.2.1 When storing the LCD modules, avoid exposure to direct sunlight or to the light of fluorescent lamps. 11.2.2 The LCD modules should be stored under the storage temperature range. If the LCD modules will be stored for a long time, the recommend condition is: Temperature : 0 40 11.2.3 Relatively humidity: 80% The LCD modules should be stored in the room without acid, alkali and harmful gas. 11.3 Transportation Precautions: www..com The LCD modules should be no falling and violent shocking during transportation, and also should avoid excessive press, water, damp and sunshine. The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 23 of 23 |
Price & Availability of TM014FDH01
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |